Accessibility Tools

  • Increase text
  • Decrease text
  • High contrast
  • Negative contrast
  • Add grayscale
  • Remove grayscale
  • Add lightbackground
  • Remove lightbackground
  • Reset
People

Marwa Zaatari

Chief Science Officer at Dzine Partners and Co-Chair of enVerid Systems Advisory Board

Member employee
BioCoursesArticles

Dr. Marwa Zaatari is Chief Science Officer at Dzine Partners and co-Chair of enVerid Systems Advisory Board. She leads the research and development of “Air as a Service” around heat exchanger coils, ventilation, filtration, and IAQ measurements. Her work continues to advance building science methods in assessing performance-based procedures to design and operate buildings to optimize energy and people efficiency.

Dr. Zaatari has extensive experience in identifying and quantifying the sources, fate, and transport of indoor air pollutants, building energy and environmental management, assessing performance-based procedures of HVAC ventilation and air cleaning, and developing and applying models for energy efficiency, indoor air quality, exposure assessment, and economic impacts of indoor air pollution. Previously, Dr. Zaatari was Vice President of Building Solutions at enVerid Systems since 2015. She leads the design of ventilation and filtration/sorption systems in buildings, integration into HVAC systems, and was responsible for managing customer-site installation and ongoing operations and field service.

Dr. Zaatari earned a PhD in Architectural and Environmental Engineering from the University of Texas at Austin with a focus on the built environment and a master’s degree in engineering management from The American University of Beirut, Lebanon with a focus on energy management. Dr. Zaatari is an ASHRAE Distinguished Lecturer and a member of several ASHRAE Committees, a member of the ASHRAE Epidemic task force, Voting Member of Standard 62.1, Chair for TRG4 Indoor Air Quality Procedure, Vice Chair of MTG.HWBE Health and Wellness in the built environment, Vice Chair of TC2.3 gaseous removal contaminants, Voting Member Standard 145.2 laboratory test method for gasphase air cleaning systems, IAQ2020 Conference organizer, LEED Committee member, and ex-Chair of LEED IAQP Working Group.